Pilot-RC Edge-540 V3 107in (2.7m) (Green/Black Decal)

Starting at: £699.95

Create Your Own Combo (Optional Items):


Add to Basket:



  • Strong yet light weight design, specially developed for precision acrobatic and extreme 3D flying
  • Included optional scale winglets, easily installed with just two screws
  • Genuine German Oracover (Ultracote) covering and printed colour schemes
  • Highly prefabricated, experienced builders can have air ready in under a day
  • Pre-installed hinges (glued and pinned)
  • Carbon reinforced wing and fuselage
  • Internally mounted cowling - so no external screws exposed
  • Removable rudder (as well as removable wings and stabs)
  • Laser engraved motor mounting position and multiple servo locations available for Rudder setup (pull pull or direct push pull)

Important note: 1. There are three servo bays on per wing. The middle servo bay is for one servo per wing. The other two servo bays are for two servos per wing. Don't cut the Ultracote with the wrong hole.

2. The CofG of the Edge-540 is not on the rear of the wing tube, please check photos for the CofG point.


The Edge 540 is well known for being one of the most aggressive full size aircraft ever made. Pilot-RC's version takes that into the model with massively powerful flying surfaces and fast responses. Contrary to most Edge's on the market, our version has been extensively tested to assure that it is still a smooth flying plane despite its crazy side!

This is the V3 of the Zivko Edge with slicker lines that make it look like its really travelling while still standing still, and with the included optional winglets make it really stand out from the crowd.

At Pilot they make every effort to provide the highest quality products and customer service. Their goal is a happy customer having a wonderful time assembling and flying Pilot model aircraft.

Included Hardware

  • Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
  • Pre-installed hinges and pre-mounted canopy
  • Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
  • Wheels, axles and wheel pants
  • Pre-preared pull-pull wires and pushrods with ball links
  • Matching carbon spinner

Required Hardware (Not Supplied)

Motor: 80-120cc or equivalent electric (Please note if your using a Saito FG-100TS 4-Stroke you will require a 26"x10" prop)

Servos: Please see MacGregor Hardware Packs below.

MacGregor Hardware Pack 1

Normal RRP: £684.45 | Combo Price: £547.56 = 20% Discount

MacGregor Hardware Pack 2

Normal RRP: £844.45 | Combo Price: £675.56 = 20% Discount

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox and possibly other small accessories.


Wingspan: V3 107in (2.7m) Without SFG
Wing Area: 2045sq in (13195sq cm)
Fuselage length: 97in (2.47m)
Weight: 31.9lbs (14.5kg)
Engine Required: 100 - 120cc or electric equivalent


  • Model:

Additional Images

This product was added to our catalog on Tuesday 21 July, 2020.