Pilot-RC BAE Hawk 1.8m (70.9in) Composite Jet (w/Retracts) (01)

Starting at: £2149.95

Create Your Own Combo (Optional Items):

Combos



Add to Basket:

IN STOCK

Everyone has a soft spot for the BAE Hawk, and this feeling will only develop further once you feel the gentle and smooth yet agile capabilities of our Pilot-RC version.

Features

  • Full composite construction, lightweight and strong
  • Two piece wing and two piece full flying stabiliser, both fully removable
  • Painted outside the mold so no seam lines

Included Hardware

  • Complete air frame (including fibreglass control horns)
  • Carbon fibre wing-tubes
  • Servo extension leads
  • Pilot-RC electric retracts and electric brakes
  • Dual wall tail pipe (for 60-100N turbines)
  • Fuel tank (2000ml) and UAT (250ml)
  • Pre-prepared pushrods with ball links
  • Pre-glued control horns

Specifications

Model:BAE Hawk
Wingspan:60.2in (1,530mm)
Length:70.9in (1,800mm) - without pitot tube
Weight:17.8lbs (8.05kg)

Video

Required Hardware

Turbine: 60-100N

Servos: Total x8 servos

x1 standard size high torque (Important: minimum 28kg)

x1 for elevator

x5 medium size servo (size: 35 x 15 x 30mm)

x2 for aileron (minimum 10kg)

x2 for flaps (minimum 10kg)

x1 for rudder (minimum 20kg)

The above five servos slots are also easily adaptable to fit standard size servo if preferred.

x2 medium size servo (size: 35 x 15 x 30mm, minimum 10kg)

x1 for steering

x1 for nose gear door

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.

1.8m BAE Hawk Servo and Servo Arm Combo (Not Supplied)

Servos:

Servo arms:

Basic Setup

Control throws:

Aileron: 12mm up / 12mm down - 40% Exp (Measured from the wingtip)

Rudder: 38mm left / 38mm right - 50% Expo

Elevator: 20mm up / 20mm down - 45% Expo (Measured from the trailing edge of the elevator at the fuselage.)

Elevator center:

Set the trailing edge of the elevator, 17mm below the top of the fuselage.

Take-off flap: 20mm

Landing flap: 41mm

Measured from the root of the wing (fuselage)

The CG is 125mm from the front leading edge on the root of the wing


  • Model:
    [PIL715]

Additional Images


This product was added to our catalog on Monday 13 February, 2023.

Customers who bought this product also purchased...